2026-04-20
NVH Insulator - 3rd Row (7-Seat) (Remove & Replace)
Correction code
TBD
FRT
0.6
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the 3rd row cabin carpet. See GUID-ADFA5D47-C4A6-4748-9E1F-E4C8F65E44EE.html.
- Disconnect the LV power. See LV Power (Disconnect and Connect) (Modify).
-
Disconnect the connector, and then
remove the 3rd row NVH insulator.
Install
-
Install the 3rd row NVH insulator onto
the vehicle, and then connect the connector.
- Connect the LV power. See LV Power (Disconnect and Connect) (Modify).
- Install the 3rd row cabin carpet. See GUID-ADFA5D47-C4A6-4748-9E1F-E4C8F65E44EE.html.