SECOND ROW 5 - SEATER 20 PIVOT BUSHING (Remove and Replace)
Correction code
1305030502
FRT
0.00
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove second row closeout assembly from 2nd row 20 seat frame. See SECOND ROW CLOSEOUT - CENTER (Remove and Replace).
-
Release the clips (x2) that
attach the lower closeout to the LH 2nd row seat back, and then remove the
closeout.
Install
-
Install 20 seatback pivot
bushing to 60 seat frame.
- Install the 2nd row armrest. See SECOND ROW CLOSEOUT - CENTER (Remove and Replace).