Pocket Bracket - LH (Model YL) (Remove and Replace)
Correction code
15301600802
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the LH load floor bracket. See Bracket - Load Floor - LH (Model YL) (Remove and Replace).
-
Release the location hole, release the
clips (x2) that attach the LH pocket bracket to the body, and then remove the LH pocket
bracket from the vehicle.
Install
-
Position the LH pocket bracket onto the body, and then install the clips (x2) that
attach the pocket bracket to the body, install the location hole.
- Install the LH load floor bracket. See Bracket - Load Floor - LH (Model YL) (Remove and Replace).