Touchscreen - Rear Display (Remove and Replace)
Correction code
2107010202
FRT
0.54
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
- 2025-08-25: Released new procedure.
Remove
- Remove the rear display touchscreen. See Touchscreen - Rear Display (Remove and Install).
Install
- Install the rear display touchscreen. See Touchscreen - Rear Display (Remove and Install).
- Locally connect a laptop with Toolbox 3 to the vehicle. See Toolbox (Connect and Disconnect).
- Perform the following routine using Service Mode or Toolbox (see 0005 - Service Modes): PING-BASH_DISPLAYvia Toolbox:(link)
- Disconnect the laptop.
- Reinstall vehicle software. See Software Reinstall - Touchscreen.