INSTRUMENT PANEL STEERING COLUMN SHROUD UPPER (Remove and Replace)
Correction code
3205010502
FRT
0.20
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the steering wheel. See STEERING WHEEL (Remove and Install).
- Use the plastic trim tool to release the clips that attach the steering column upper shroud to the lower shroud, and then pull the upper shroud up to remove it from the vehicle.
Install
-
Position the steering column upper shroud onto the vehicle, and then install the
clips that attach the steering column upper shroud to the lower shroud.
NoteMake sure that the clips are properly engaged.
- Install the steering wheel. See STEERING WHEEL (Remove and Install).