2026-06-16

Rear Left Bluetooth Low Energy (Remove and Replace)

Correction code 1715010502 FRT 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-06-16: Released new procedure.
Table 1. Torque Specifications: Rear Left Bluetooth Low Energy (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH corner of the rear fascia assembly to the body
3.5 Nm (2.6 lbs-ft)
  • 10 mm socket
Reuse
Bolt that attaches the LH side of the rear fascia assembly to the body
2 Nm (1.5 lbs-ft)
  • 8 mm socket
Reuse
Bolt that attaches LH corner of the rear fascia diffuser to the body
5 Nm (3.7 lbs-ft)
  • Socket 1/4in Dr. 6pt. Deep x 10mm
Reuse