Outer Belt - Front Door - LH (Remove and Replace)
Correction code
1170020302
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.NOTE:
See Ergonomic Precautionsfor safe
and healthy working practices.
Remove
- Open the LH front door and lower the LH front window fully.
-
Pull up and then pry to release the LH front door outer belt seal from the door using
a plastic trim tool, and then remove the seal from the door.
Install
-
Install the LH front door outer belt seal onto the door assembly by pushing down to
secure it.
NoteMake sure both ends are properly installed.
- Close the LH front door and raise the LH front window.