HVAC - COMBINATION FILTER (Remove and Replace)
Correction code
1810010702
FRT
0.12
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the HVAC combination filter. See HVAC - COMBINATION FILTER (Remove and Install).
Install
- Install the HVAC combination filter. See HVAC - COMBINATION FILTER (Remove and Install).
- On the touchscreen, tap the vehicle icon (at the lower left corner of the touchscreen UI), and then tap , type the Maintenance Details, and click Record and Confirm to reset the cabin air filter maintenance record.
- Raise the LH front window and close the LH front door.