Rear Wing Bracket - LH (Remove and Install)
Correction code
1001050301
FRT
0.42
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and FRT
listed above reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times
to learn more about FRTs and how they are created.
NOTE: See Personal Protection
to make sure you are wearing proper PPE when performing the procedure
below.
NOTE:
See Ergonomic Precautions for
safe and healthy working practices.
Remove
- Remove the rear fascia assembly. See Assembly - Fascia and Diffuser - Rear (Remove and Install).
-
Remove the clips (x4) and the tab that
attach the rear wing bracket to the vehicle.
Install
-
Install the clips (x4) and the tab
that attach the rear wing bracket to the vehicle.
- Install the rear fascia. See Assembly - Fascia and Diffuser - Rear (Remove and Install).