Trunk Tub (Remove and Replace)
Correction code
1530051602
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the front trunk load floor. See Trunk Load Floor - Front (Remove and Replace).
- Remove the trunk sill trim. See Trunk Sill Lower Trim (Remove and Replace).
- Remove the LH and RH load floor brackets. See Bracket - Load Floor - LH (Remove and Replace).
-
Remove the rear trunk
tub.
Install
-
Install the rear trunk
tub.
- Install the LH and RH load floor brackets. See Bracket - Load Floor - LH (Remove and Replace).
- Install the trunk sill trim. See Trunk Sill Lower Trim (Remove and Replace).
- Install the trunk load floor. See Trunk Load Floor - Front (Remove and Replace).