2025-03-12

Console - End Panel (Remove and Replace)

Correction code 1519021402 FRT 0.05 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.NOTE: See Ergonomic Precautionsfor safe and healthy working practices.

Remove

  1. Open all doors and lower all windows.
  2. Move the LH and RH front seats forward.
  3. Remove the clips (x6) and tabs (x2) that attach the center console rear end panel to the console, and then remove the end panel from the console.
    Informational PurposesAn informational icon, calling your attention
    Note
    Release the upper clips and then the lower tabs.

Install

  1. Install the clips (x6) and tabs (x2) that attach the center console rear end panel to the console.
    Informational PurposesAn informational icon, calling your attention
    Note
    Fasten the lower tabs and then the upper clips.
  2. Move the LH and RH front seats back to their original positions.
  3. Raise all windows and close all doors.