2025-03-12

HARNESS - CENTER CONSOLE (Remove and Replace)

Correction code 1710020402 FRT 0.00 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the center console air duct. See .
  2. Disconnect center console connector.
  3. Release the clips (x15) that attach the center console harness to center console structure, and then remove the harness from the vehicle.

Install

  1. Position the center console harness to the center console, and then fasten the clips (x15) that attach the center console harness to the back of the center console.
  2. Connect center console connector.
  3. Install the center console air duct. See .