2025-03-12

Liftgate Upper Trim (Remove and Replace)

Correction code 1511010502 FRT 0.05 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.NOTE: See Ergonomic Precautionsfor safe and healthy working practices.

Remove

  1. Open the liftgate.
  2. Release the clips and tabs, and then remove the liftgate upper trim from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use a clip prytool to release the clips. Start from the side clips and end with the upper clips.

Install

  1. Check the trim panel clips and replace any damaged clips.
  2. Install the liftgate upper trim from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Secure the top portion first. Ensure the tabs are aligned with the liftgate lower trim.
  3. Close the liftgate.