2025-03-12
2nd Row - 5-Seater B-Cover Inboard Outer - LH (Remove and Replace)
Correction code
1308010702
FRT
0.24
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Equipment:
- 1501599-00-A, Pliers, Hog Ring
Remove
- Remove 2nd row RH seat assembly from vehicle. See Seat Assembly - 2nd Row - RH (5-Seat) (Remove and Install).
- Remove center backpanel from 2nd row center seatback. See 2nd Row - Backpanel - Center (Remove and Replace).
- Remove center seatback lumbar bun. See Lumbar Bun - Center - 2nd Row (Remove and Replace).
-
Pull 60 inboard outer B-cover forward
to remove it from 60 seat frame.
Install
-
Install 60 B-cover inboard inner to 60 seat frame.
- Install center seatback lumbar bun. See Lumbar Bun - Center - 2nd Row (Remove and Replace).
- Install center backpanel from 2nd row center seatback. See 2nd Row - Backpanel - Center (Remove and Replace).
- Install 2nd row RH seat assembly to vehicle. See Seat Assembly - 2nd Row - RH (5-Seat) (Remove and Install).