HOOD BAFFLE (Remove and Replace)
Correction code
1224010402
FRT
0.05
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Open the LH front door and lower the LH front window.
- Open the hood.
-
Release the clips (x11) to
remove the hood baffle.
Install
-
Position the locating pins (x3), and then secure the clips (x11) to attach
the hood baffle to the hood.
- Close the hood.
- Raise the LH front window and close the LH front door.