Cabin HVAC - Passenger Ducting and Vents - Air Extractor - LH (Remove and Install)
Correction code
1810020102
FRT
0.25
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the trunk side trim. See Trunk Side Trim LH - Rear Under Body (Remove and Replace).
-
Release the clips (x4) that attach the
LH air extractor to the vehicle.
-
Push the LH air extractor into the body panel, and then rotate outward to
remove it from the vehicle.
Install
-
Insert the LH air extractor into the
body panel, rotate the extractor into position, and then pull the extractor outwards to
the fasten the clips.
- Install the trunk side trim. See Trunk Side Trim LH - Rear Under Body (Remove and Replace).