LIFTGATE SWITCH (Remove and Replace)
Correction code
1511010402
FRT
0.10
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the liftgate upper trim. See LIFTGATE UPPER TRIM (Remove and Replace).
- Remove the liftgate lower trim. See LIFTGATE LOWER TRIM - REAR SPEAKER (Remove and Replace).
- Disconnect the liftgate switch connector.
- Remove the liftgate switch.
Install
- Install the liftgate switch into position.
- Connect the liftgate switch connector.
- Install the liftgate lower trim. See LIFTGATE LOWER TRIM - REAR SPEAKER (Remove and Replace).
- Install the liftgate upper trim. See LIFTGATE UPPER TRIM (Remove and Replace).