2026-08-19

Heat Pad - Back Rest - Passenger Seat (Model Y L) (Remove and Replace)

Correction code 1307031002 FRT 1.02 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

2026-08-18: Released new procedure.

Warning

Seat base edges are sharp and can cause personal injury. Wear cut resistant gloves when removing the seat from the vehicle, and while performing procedures that involve work on or near the seat base.

Note

The driver seat back foam and heat pad cannot be replaced separately. They need to be replaced together.

Remove

Remove the driver seat back foam heat pad from the seat back foam. See Cover - Seat Back - 1st Row - RH (6 Seat) (Remove and Replace).

Note
During removal, certain steps require extra care. See the animation(s) for detailed guidance.

Replace

Install the driver seat back foam heat pad to the seat back foam, and then install them to the vehicle. See Cover - Seat Back - 1st Row - RH (6 Seat) (Remove and Replace).

Heat Pad - Back Rest - Passenger Seat (Model Y L) (Remove and Replace)

Remove

Replace

Figure 1

Figure 2

Figure 3