Hood Strut (Remove and Replace)
Correction code
1133030302
FRT
0.12
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and FRT
listed above reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times
to learn more about FRTs and how they are created.
NOTE: See Personal Protection
to make sure you are wearing proper PPE when performing the procedure
below.
NOTE:
See Ergonomic Precautions for
safe and healthy working practices.
Equipment:
- 1080562-00-A - TELESCOPING HOOD PROP
Remove
- Remove the rear apron. See Underhood Apron - Rear (Remove and Replace).
- Support hood in open position.
-
Release clip securing LH gas strut to hood hinge and remove strut.
-
Release clip securing LH gas strut to
body mount and remove strut.
Install
-
Lubricate upper and lower pivot points.
-
Install gas strut onto body and hood mount.
- Remove telescoping hood prop.
- Install the rear apron. See Underhood Apron - Rear (Remove and Replace).