1ST ROW SEATBACK - FOAM PAD - LEFT HAND (Remove and Replace)
Correction code
1307011502
FRT
0.80
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the driver seat back trim from the foam, and then remove the foam. See 1ST ROW SEAT BACK - SOFT TRIM COVER - LEFT HAND (Remove and Replace).
Install
-
Install a new seat back heat pad
(1655396-00-A) onto the seat back foam pad assembly.
- Install the driver seat back trim onto the foam, and then install the foam to the vehicle. See 1ST ROW SEAT BACK - SOFT TRIM COVER - LEFT HAND (Remove and Replace).