GLASS RUN SEAL - FRONT DOOR - LEFT HAND (Remove and Replace)
Correction code
1150010102
FRT
0.20
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
-
Remove the LH front exterior mirror assembly. See EXTERIOR MIRROR - LEFT HAND (Remove and Replace).
NoteIt is not necessary to separate the LH door mirror glass and skull cap from the LH front exterior mirror assembly.
- Pull upwards to remove the LH front door glass run seal from the LH front door.
Install
-
Position the LH front door glass run seal on the LH front door.
NoteApply a small amount of P80 lubricant on the length of the seal to aid installation.
- Install the LH front exterior mirror assembly. See EXTERIOR MIRROR - LEFT HAND (Remove and Replace).