Torque Specifications - Seats

Table 1. Torque Specifications: 1ST ROW SEATBACK FRAME POWER (Remove and Replace) / 1ST ROW SEAT CUSHION FRAME POWER (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Inboard and outboard bolts (x4) that attach the seatback frame to the seat cushion frame
43 Nm (31.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • Torx T50 socket
  • Flex head ratchet/flex head torque wrench
Replace 1128435-00-C
Table 2. Torque Specifications: 1ST ROW POWER LUMBAR SEATBACK - LEFT HAND (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the power lumbar to the seat back frame
5 Nm (3.7 lbs-ft)
  • 10 mm socket
  • 2 in extension
  • Flex head ratchet/flex head torque wrench
Reuse
Table 3. Torque Specifications: Motor - Recliner - Backrest - Front Seat (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the recliner motor to the seat back frame
5 Nm (3.7 lbs-ft)
  • Ratchet/torque wrench
  • 8 mm socket
Reuse
Table 4. Torque Specifications: 1ST ROW HEIGHT ADJUSTER MOTOR (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Front right bolt that attaches the LH front seat height motor to the cushion power frame assembly
23 Nm (17.0 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • Torx T50 socket
  • Ratchet/torque wrench
Replace 1109796-00-B
Rear right bolt that attaches the LH front seat height motor to the cushion power frame assembly
19 Nm (14.0 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • Torx T45 socket
  • Ratchet/torque wrench
Replace 1106615-00-C
Table 5. Torque Specifications: 1ST ROW TILT MOTOR (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x3) that attach the tilt motor to the seat frame
7.5 Nm (5.5 lbs-ft)
  • Ratchet/torque wrench
  • 8 mm 12-point deep socket
Reuse
Bolt that attaches the driver seat tilt motor adjustment arm to the seat assembly
16 Nm (11.8 lbs-ft)
  • Ratchet/torque wrench
  • Torx T40 socket
Replace 1109741-00-E
Table 6. Torque Specifications: 1ST ROW SEAT TRACK BRIDGE (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x4) that attach the driver seat to body
33.5 Nm (24.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • Torx Plus TP45 Bit Socket
  • Ratchet/torque wrench
Replace 1458818-00-A
Outboard bolts (x2) that attach the seat track to the seat cushion frame
38 Nm (28.0 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • Torx T45 socket
  • Flex head ratchet/flex head torque wrench
Replace 1660192-00-A
Table 7. Torque Specifications: 1ST ROW SEAT RISER (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Seat riser bolts (x2)
33.5 Nm (24.7 lbs-ft)
  • 11 mm deep socket
  • Flex head ratchet/flex head torque wrench
Replace 1616775-00-B
Table 8. Torque Specifications: FIRST ROW LEFT HAND SEAT COMPLETE (Remove and Install) / FIRST ROW TRACK COVER - LEFT HAND (Remove and Replace) / 1ST ROW CUSHION SUSPENSION (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x4) that attach the driver seat to body
33.5 Nm (24.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • Torx Plus TP45 Bit Socket
  • Ratchet/torque wrench
Replace 1458818-00-A
Table 9. Torque Specifications: 2ND ROW SEAT 5 SEATER - 60 (Remove and Replace) / 2ND ROW SEAT 5 SEATER - 40 (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts that attach the 2nd row 60/40 seat frame to body
37 Nm (27.3 lbs-ft)
  • 11 mm socket
  • Flex head ratchet/flex head torque wrench
  • Cordless Ratchet/Impact Driver
Replace 1616775-00-B
Table 10. Torque Specifications: Seat Back - 2nd Row - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the lower anchor to the 2nd row center retractor
40 Nm (29.5 lbs-ft)
  • Torx T50 socket
Replace 2000419-00-A
Table 11. Torque Specifications: 1ST ROW OUTBOARD SIDESHIELD - FOR LEFT HAND SEAT - LUMBAR (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the driver seat outboard side shield to the seat frame
5 Nm (3.7 lbs-ft)
  • Ratchet/torque wrench
  • 2 in extension
  • 8 mm socket
Reuse
Screws (x3) that attach the 8 way and lumbar switch assembly to the LH front outboard shield
0.7 Nm (6 lbs-in)
  • Torx T20 bit
  • 2 in extension
  • Ratchet/torque wrench
Reuse
Table 12. Torque Specifications: FIRST ROW SWITCH PACKAGE 8 WAY WITH LUMBAR - LEFT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x3) that attach the 8 way and lumbar switch assembly to the LH front outboard shield
0.7 Nm (6 lbs-in)
  • Torx T20 bit
  • 2 in extension
  • Ratchet/torque wrench
Reuse
Table 13. Torque Specifications: SECOND ROW - CENTER SEAT BELT RETRACTOR (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Lower anchor bolt that attaches the seat belt to the LH 2nd row seat frame
40 Nm (29.5 lbs-ft)
  • 13 mm socket
  • Flex head ratchet/flex head torque wrench
  • 6 in extension
Replace
Bolt that attaches the seat belt retractor assembly to the seat frame
45 Nm (33.2 lbs-ft)
  • 13 mm deep socket
  • 6 in extension
Replace
Table 14. Torque Specifications: 1ST ROW SEAT BACK - SOFT TRIM COVER - LEFT HAND (Remove and Replace) / 1ST ROW HEADREST POST GUIDE (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the bottom of the lumbar support to the seat back frame
5 Nm (3.7 lbs-ft)
  • 10 mm socket
  • 2 in extension
  • Ratchet/torque wrench
Reuse
Nuts (x2) that attach the driver seat side airbag/FSAB to the seat back frame
5.4 Nm (4.0 lbs-ft)
  • Ratchet/torque wrench
  • 10 mm deep socket
Replace 1068309-00-A
Table 15. Torque Specifications: 2ND ROW 20 LUMBAR BUN PUR BLACK (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Nut secures center seatback lumbar bun
2.2 Nm (1.6 lbs-ft)
  • Torx T20 bit
  • Ratchet/torque wrench
Reuse
Table 16. Torque Specifications: 2ND ROW ARMREST - 5-SEATER (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x2) that attach the LH and RH armrest panel cover
2.5 Nm (1.8 lbs-ft)
  • Torx T20 bit
  • Ratchet/torque wrench
Reuse
Bolts (x2) that attach the armrest lobe
8 Nm (5.9 lbs-ft)
  • Ratchet/torque wrench
  • 10 mm deep socket
Reuse
Table 17. Torque Specifications: FIRST ROW PODIUM (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x4) that attach the 1st row podium to the body
33.5 Nm (24.7 lbs-ft)
  • 11 mm socket
Replace 1490674-00-A
Table 18. Torque Specifications: SECOND ROW RECLINER MOTOR - LEFT HAND - 60P (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attach recliner motor to LH seat back frame
5 Nm (3.7 lbs-ft)
  • Ratchet/torque wrench
  • Torx T30 socket
Reuse
Table 19. Torque Specifications: SEAT FOLD SHOULDER SWITCH - LEFT and RIGHT HAND SIDE (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (X2) that secure seat fold switch to cushion foam
1 Nm (.7 lbs-ft)
  • 10 mm socket
  • Ratchet/torque wrench
  • 4 in extension
Reuse
Bolts (X2) that attach the LH rear seat fold switch to switch plastic assembly
0.7 Nm (6 lbs-in)
  • 4 in extension
  • Ratchet/torque wrench
  • Torx T20 bit
Reuse
Table 20. Torque Specifications: SECOND ROW RECLINER MOTOR - RIGHT HAND - 40P (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt attaches recliner motor to seat back frame
5 Nm (3.7 lbs-ft)
  • Ratchet/torque wrench
  • Torx T30 socket
Reuse
Table 21. Torque Specifications: SECOND ROW 5 - SEATER CENTER PIVOT BRACKET CLAMP (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the pivot bracket clamps to the seat assembly
22 Nm (16.2 lbs-ft)
  • Torx T45 socket
Reuse
Table 22. Torque Specifications: SECOND ROW SEAT SWITCH POWER RECLINE - RIGHT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the recliner switch to the recliner switch assembly
0.7 Nm (6 lbs-in)
  • Torx T20 socket
  • Torque wrench 1/4" hexagon (0.2Nm-4Nm)
Reuse
Bolts (x2) that attach the recliner switch to the seat cushion foam.
1 Nm (.7 lbs-ft)
  • 10 mm socket
  • Torque wrench 1/4" hexagon (0.2Nm-4Nm)
Reuse