Bracket - Center - Rear Fascia (Remove and Replace)
Correction code
TBD
FRT
0.42
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Torque Specifications
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Rear fascia center bracket bolts (x4) |
![]() 4 Nm (2.9 lbs-ft) |
|
Reuse |
Remove
- Remove the rear fascia and diffuser assembly. See GUID-FF55B6F8-E257-4E77-B06D-3511D38E1426.html.
-
Remove the bolts (x4) and release the tabs (x2) that secure the rear fascia center
bracket.
TIpUse of the following tool(s) is recommended:
- 10 mm socket
Install
-
Secure the tabs (x2) and install the bolts (x4) to install the rear fascia center
bracket.4 Nm (2.9 lbs-ft)TIpUse of the following tool(s) is recommended:
- 10 mm socket
- Install the rear fascia and diffuser assembly. See GUID-FF55B6F8-E257-4E77-B06D-3511D38E1426.html.