2026-08-09

2nd Row Seat Harness - 5-Seater - LH (Remove and Replace)

Correction code 1710080202 FRT 0.42 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove 2nd row seat cushion. See Seat Cushion - 2nd Row (Remove and Replace).
  2. Remove the LH 2nd row seat assembly. See Seat Assembly - 2nd Row - LH (5-Seat) (Remove and Install).
  3. Disconnect belt buckle connector.
  4. Disconnect center belt buckle connector.
  5. Remove 2nd row LH seat belt buckle harness clip.
  6. Remove harness from LH seat cushion frame.
  7. Place 2nd row LH seat assembly on a safe and stable work area.
  8. Separate the LH seat back shell from seat rail. See Shell - Seat Back - 2nd Row - LH (Remove and Replace).
  9. Tilt the seat back forward.
  10. Remove LH seat harness from seat back shell.

Install

  1. Install LH seat harness assembly to 2nd row seat back shell.
  2. Install LH seat harness to seat back shell.
  3. Tilt the backrest of the seat backwards.
  4. Install the LH seat back shell to seat rail. See Shell - Seat Back - 2nd Row - LH (Remove and Replace).
  5. Install harness to LH seat cushion frame.
  6. Install 2nd row LH seat belt buckle harness clip.
  7. Connect belt buckle connector.
  8. Connect center belt buckle connector.
  9. Install the LH 2nd row seat assembly. See Seat Assembly - 2nd Row - LH (5-Seat) (Remove and Install).
  10. Install 2nd row seat cushion. See Seat Cushion - 2nd Row (Remove and Replace).