2025-03-13

2ND ROW SEAT HARNESS - 5-SEATER - RIGHT HAND (Remove and Replace)

Correction code 1710080302 FRT 0.00 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Install

  1. Install RH seat harness assembly to 2nd row RH seat back shell.
  2. Install LH seat harness to seat back shell.
  3. Tilt the backrest of the seat backwards.
  4. Install the LH seat back shell to seat rail. See Shell - Seat Back - 2nd Row - LH (Remove and Replace).
  5. Install harness to LH seat cushion frame.
  6. Install 2nd row LH seat belt buckle harness clip.
  7. Connect belt buckle connector.
  8. Connect center belt buckle connector.
  9. Install the RH seat back to seat rail. See Seat Back - 2nd Row - RH (Remove and Replace).