Table 1. Torque Specifications: Front Coil Spring and Damper - FUCA Mount, LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts (x3) that attach the front upper control arm mount to the LH front spring and damper assembly	23 Nm (17.0 lbs-ft)	13 mm socket Cordless Ratchet/Impact Driver Flex head ratchet/flex head torque wrench	Reuse

Table 2. Torque Specifications: Control Arm - Upper - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
13mm bolts (x2) that attach the LH front upper control arm mount to the body	34 Nm (25.1 lbs-ft)	Cordless Ratchet/Impact Driver 13 mm socket Flex head ratchet/flex head torque wrench	Reuse
15mm bolts (x2) that attach the LH front upper control arm mount to the body	62 Nm (45.7 lbs-ft)	Cordless Ratchet/Impact Driver 15 mm socket Flex head ratchet/flex head torque wrench	Reuse
Nut that attaches the front stabilizer bar end link to the LH front strut	98 Nm (72.3 lbs-ft)	18 mm socket Torx T40 socket	Replace	1111543-00-A
Bolt and nut that attach the LH front upper control arm to the knuckle	56 Nm (41.3 lbs-ft)	15 mm socket Torx T50 socket	Nut: Replace; Bolt: Reuse	1111145-00-A
Bolts (x2) that attach the LH front upper control arm to the front upper control arm mount	50 Nm (36.9 lbs-ft)	13 mm deep socket Cordless Ratchet/Impact Driver Flex head ratchet/flex head torque wrench	Reuse

Table 3. Torque Specifications: Non Driven Hub (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x3) that attach the LH front hub to the knuckle	115 Nm (84.8 lbs-ft)	18 mm socket Flex head ratchet/flex head torque wrench Cordless Ratchet/Impact Driver	Reuse

Table 4. Torque Specifications: Rear Knuckle - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
LH rear halfshaft nut	300 Nm (221.2 lbs-ft)	32 mm deep impact socket Flex head ratchet/flex head torque wrench	Reuse
Bolt that attaches the LH rear ABS wheel speed sensor to the knuckle	5 Nm (3.7 lbs-ft)	Torx T30 socket Flex head ratchet/flex head torque wrench 4 in extension	Reuse
Nut that attaches the LH rear stabilizer bar link to the LH rear knuckle	55 Nm (40.6 lbs-ft)	15 mm socket Flex head ratchet/flex head torque wrench	Replace	1111542-00-A
Bolt and nut that attach the LH rear upper aft link to the LH rear knuckle	134 Nm (98.8 lbs-ft)	21 mm socket Flex head ratchet/flex head torque wrench	Reuse
Bolt and nut that attach the LH rear upper fore link to the knuckle	84 Nm (61.9 lbs-ft)	18 mm socket 3 in extension Cordless Ratchet/Impact Driver Flex head ratchet/flex head torque wrench	Reuse
Bolt and nut that attach the LH rear toe link to knuckle	76 Nm (56.0 lbs-ft)	Cordless 3/8in Dr Impact 18 mm socket Flex head ratchet/flex head torque wrench	Reuse
Bolt and nut that attach the LH rear lower fore link to knuckle	76 Nm (56.0 lbs-ft)	Cordless 3/8in Dr Impact 18 mm deep socket 3 in extension Flex head ratchet/flex head torque wrench	Reuse
Bolt and nut that attach the LH rear lower aft link to the knuckle	115 Nm (84.8 lbs-ft)	Cordless Ratchet/Impact Driver 21 mm socket Flex head ratchet/flex head torque wrench	Reuse

Table 5. Torque Specifications: Rear Suspension Arms - Rear Lower Fore Link (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Small bolts (x2) that attach the LH shear plate to the HV battery	64 Nm (47.2 lbs-ft)	Cordless 3/8in Dr Impact 3 in extension 13 mm socket	Reuse
Larger bolt that attach the LH shear plate to the HV battery	125 Nm (92.2 lbs-ft)	Cordless 3/8in Dr Impact 6 in extension 21 mm deep socket Ratchet/torque wrench	Reuse
Bolt and nut that attach the LH rear lower fore link to knuckle	76 Nm (56.0 lbs-ft)	Cordless 3/8in Dr Impact 18 mm deep socket 3 in extension Flex head ratchet/flex head torque wrench	Reuse
Bolt and nut that attach the LH rear fore lower link to the subframe	76 Nm (56.0 lbs-ft)	18 mm socket Ratchet/torque wrench Flex head ratchet/flex head torque wrench	Reuse

Table 6. Torque Specifications: Rear Suspension Arms - Rear Upper Aft Link (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt and nut that attach the LH rear upper aft link to the LH rear knuckle	134 Nm (98.8 lbs-ft)	21 mm socket Flex head ratchet/flex head torque wrench	Reuse
Bolt and nut that attach the LH rear upper aft link to the subframe	134 Nm (98.8 lbs-ft)	21 mm combination wrench 21 mm socket Flex head ratchet/flex head torque wrench	Reuse

Table 7. Torque Specifications: Rear Stabilizer Bar and Links - Stabar link - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the LH rear drop link to the LH rear stabilizer bar	55 Nm (40.6 lbs-ft)	5 mm hex 15 mm combination flex head wrench 15 mm socket Flex head ratchet/flex head torque wrench	Replace
Nut that attaches the LH rear stabilizer bar to the LH rear knuckle	55 Nm (40.6 lbs-ft)	15 mm socket Flex head ratchet/flex head torque wrench	Replace

Table 8. Torque Specifications: Rear Suspension Arms - Rear Toe Link (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt and nut that attach the LH rear toe link to knuckle	76 Nm (56.0 lbs-ft)	Cordless 3/8in Dr Impact 18 mm socket Flex head ratchet/flex head torque wrench	Reuse
Bolt and nut that attach the LH rear toe link to the subframe	85 Nm (62.7 lbs-ft)	Cordless 3/8in Dr Impact 18 mm deep socket Flex head ratchet/flex head torque wrench 18mm 12pt combination wrench	Reuse
Bolt that attaches the LH rear brake rotor to the hub	5 Nm (3.7 lbs-ft)	10 mm socket Cordless Ratchet/Impact Driver 2 in extension	Reuse

Table 9. Torque Specifications: Rear Suspension Arms - Rear Lower Aft Link (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the front of the diffuser to the body	4 Nm (2.9 lbs-ft)	Cordless 3/8in Dr Impact 2 in extension 10 mm socket	Reuse
Bolt and nut that attach the LH rear lower aft link to the rear subframe	115 Nm (84.8 lbs-ft)	21 mm socket 21 mm combination wrench	Reuse

Table 10. Torque Specifications: Rear Suspension Arms - Rear Upper Fore Link (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt and nut that attach the LH rear upper fore link to the knuckle	84 Nm (61.9 lbs-ft)	18 mm socket 3 in extension Cordless Ratchet/Impact Driver Flex head ratchet/flex head torque wrench	Reuse
Bolt and nut that attach the LH rear upper fore link to the subframe	84 Nm (61.9 lbs-ft)	18 mm combination wrench 18 mm socket Flex head ratchet/flex head torque wrench	Reuse

Table 11. Torque Specifications: Rear Stabilizer Bar and Links - Stabar - Rear (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts (x2) that attach the stabilizer bar to the end links	55 Nm (40.6 lbs-ft)	15 mm socket Flex head ratchet/flex head torque wrench	Replace	1111542-00-A
Bolts (x4) that attach the rear stabilizer bar to the rear subframe	30 Nm (22.1 lbs-ft)	Cordless Ratchet/Impact Driver 3 in extension 11 mm deep socket Flex head ratchet/flex head torque wrench	Replace	1111154-00-B

Table 12. Torque Specifications: Link - Lateral - Lower - Front - LH (Remove and Replace) and Links - Lateral - Lower - Front - Pair (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the LH front lower lateral link to the knuckle	180 Nm (132.7 lbs-ft)	Cordless Ratchet/Impact Driver 22 mm socket Ratchet/torque wrench	Replace	1109263-00-B
Bolts (x2) that attach the LH front lower lateral link to the front subframe	190 Nm (140.1 lbs-ft)	Cordless Ratchet/Impact Driver 21 mm shallow socket Ratchet/torque wrench	Replace	Install only bolt PN 2123635-00-A, which has patch material on the bolt threads.
Bolt and nut that attach the LH strut to the LH front lower lateral link	106 Nm (78.2 lbs-ft)	Cordless Ratchet/Impact Driver 21 mm deep socket Ratchet/torque wrench	Reuse

Table 13. Torque Specifications:

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the LH and RH front lower compliance links to the knuckle			Replace
Bolt and nut that attach the LH and RH front lower compliance links to the front subframe	115 Nm (84.8 lbs-ft)	Cordless Ratchet/Impact Driver 21 mm deep socket Ratchet/torque wrench	Reuse

Table 14. Torque Specifications:

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
LH front drive unit halfshaft nut	300 Nm (221.2 lbs-ft)	32 mm deep impact socket	Replace
Bolts that attach the LH front hub and bearing to the LH front knuckle	85 Nm (62.7 lbs-ft)	18 mm socket Flex head ratchet/flex head torque wrench Cordless Ratchet/Impact Driver	Reuse

Table 15. Torque Specifications: Link - Compliance - Lower - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the front lower compliance link to the knuckle	180 Nm (132.7 lbs-ft)	22 mm deep socket Flex head ratchet/flex head torque wrench Cordless Ratchet/Impact Driver	Replace	1109263-00-B
Bolt and nut that attach the LH front compliance link to the front subframe	115 Nm (84.8 lbs-ft)	21 mm socket Breaker bar 3 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse

Table 16. Torque Specifications: Rear Spring - RWD (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attach the LH damper to the LH rear lower aft link	115 Nm (84.8 lbs-ft)	Cordless Ratchet/Impact Driver 21 mm socket Ratchet/torque wrench	Reuse
Bolt that attach the LH rear lower control arm to the knuckle	115 Nm (84.8 lbs-ft)	Cordless Ratchet/Impact Driver 21 mm socket Flex head ratchet/flex head torque wrench	Reuse

Table 17. Torque Specifications: Stabilizer Bar - Front (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts (x2) that attach the front stabilizer bar to the LH and RH front stabilizer bar links	98 Nm (72.3 lbs-ft)	Torx T40 bit 18 mm socket	Replace	1188387-00-A
Nuts (x4) that attach the front stabilizer bar to the front subframe	35 Nm (25.8 lbs-ft)	15 mm socket	Replace	1111145-00-A

Table 18. Torque Specifications: Front Stabilizer Link - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the front stabilizer bar link to the LH front stabilizer bar	98 Nm (72.3 lbs-ft)	Torx T40 bit 18 mm socket	Replace	1188387-00-A
Bolt that attaches the front stabilizer link to the front damper	98 Nm (72.3 lbs-ft)	Torx T40 bit 18 mm socket	Replace	111543-00-A

Table 19. Torque Specifications: Damper Coil - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) secure the LH strut to body at top mount	41 Nm (30.2 lbs-ft)	15 mm socket	Reuse
Bolt securing LH damper to rear lower aft link	115 Nm (84.8 lbs-ft)	21 mm socket	Reuse

Table 20. Torque Specifications: Hub - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the LH rear caliper to the LH rear knuckle	83 Nm (61.2 lbs-ft)	External Torx E18	Replace	1088969-00-B
Bolts (x3) that attach the LH rear hub to the LH rear knuckle	115 Nm (84.8 lbs-ft)	18 mm socket	Reuse
Bolt that attaches the LH rear brake rotor to the hub	5 Nm (3.7 lbs-ft)	10 mm socket	Reuse
Nut that attach the LH halfshaft to the hub assembly	300 Nm (221.2 lbs-ft)	32 mm deep impact socket	Replace	1765133-00-A
The LH rear halfshaft nut	300 Nm (221.2 lbs-ft)	32 mm deep impact socket Flex head ratchet/flex head torque wrench	Reuse

Table 21. Torque Specifications: Driven Hub - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x3) that attach the LH front hub to the LH front knuckle	115 Nm (84.8 lbs-ft)	18 mm socket	Reuse
Bolts (x2) that attach the LH front caliper to the LH front knuckle	94 Nm (69.3 lbs-ft)	Cordless Ratchet/Impact Driver External Torx E18 Ratchet/torque wrench	Replace	1088969-00-B
Bolt that attaches the LH front brake hose bracket to the LH front knuckle	5 Nm (3.7 lbs-ft)	Cordless Ratchet/Impact Driver 4 in extension 10 mm socket Ratchet/torque wrench	Reuse
The LH front halfshaft nut	300 Nm (221.2 lbs-ft)	32 mm deep impact socket	Replace	1765133-00-A

Table 22. Torque Specifications: Front Knuckle - LH (Remove and Replace) and Front Knuckle - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH front ABS wheel speed sensor to the knuckle	5 Nm (3.7 lbs-ft)	Torx T30 socket Cordless Ratchet/Impact Driver Flex head ratchet/flex head torque wrench 4 in extension	Reuse
Nut that attaches the LH front lower compliance link to the knuckle	180 Nm (132.7 lbs-ft)	22 mm socket	Replace	1109263-00-B
Nut that attaches the LH front lower lateral link to the knuckle	180 Nm (132.7 lbs-ft)	Cordless Ratchet/Impact Driver 22 mm socket Ratchet/torque wrench	Replace	1109263-00-B
Nut that attach the LH tie rod outer assembly to LH front knuckle	180 Nm (132.7 lbs-ft)	22 mm deep socket	Replace	1109263-00-A
Bolt and a new nut that attach the LH front upper control arm to the knuckle	56 Nm (41.3 lbs-ft)	15 mm socket Torx T50 socket	Replace	1111145-00-A

Table 23. Torque Specifications: Damper Coil - RWD - Front - LH (Remove and Replace) and Damper Coil - Dual Motor - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the LH brace to the vehicle	18.8 Nm (13.9 lbs-ft)	10 mm socket	Reuse
Bolt and nut that attach the LH front lower lateral link to the strut	106 Nm (78.2 lbs-ft)	21 mm socket	Reuse
Nut that attaches the front stabilizer bar end link to the LH front strut	98 Nm (72.3 lbs-ft)	18 mm socket Torx T40 socket	Replace	1111543-00-A
Nuts (x3) that attach the front upper control arm mount to the LH front spring and damper assembly	23 Nm (17.0 lbs-ft)	13 mm socket	Reuse

Table 24. Torque Specifications: Damper Coil - RWD - Front - RH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the RH brace to the vehicle	18.8 Nm (13.9 lbs-ft)	Ratcheting combination wrench flex head 13mm Tight-clearance offset (2098128-00-A, installation only)	Reuse
Bolt that attaches the RH brace to the vehicle	18.8 Nm (13.9 lbs-ft)	13 mm deep socket	Reuse
Nut that attaches the front stabilizer bar end link to the RH front strut	98 Nm (72.3 lbs-ft)	18 mm socket Torx T40 socket	Replace	1111543-00-A
Bolt and nut that attach the RH front lower lateral link to the strut	106 Nm (78.2 lbs-ft)	21 mm socket	Reuse
Nuts (x3) that attach the front upper control arm mount to the RH front spring and damper assembly	23 Nm (17.0 lbs-ft)	13 mm socket	Reuse

Table 25. Torque Specifications: Damper Coil - Dual Motor - Front - RH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the RH brace to the vehicle	18.8 Nm (13.9 lbs-ft)	Ratcheting combination wrench flex head 13mm Tight-clearance offset (2098128-00-A, installation only)	Reuse
Bolt that attaches the RH brace to the vehicle	18.8 Nm (13.9 lbs-ft)	13 mm deep socket	Reuse
Nut that attaches the front stabilizer bar end link to the RH front strut	98 Nm (72.3 lbs-ft)	18 mm socket Torx T40 socket	Replace	1111543-00-A
Bolt and nut that attach the RH front upper control arm to the knuckle	56 Nm (41.3 lbs-ft)	15 mm socket Torx T50 socket	Bolt: Reuse Nut: Replace	1111145-00-A
Bolt and nut that attach the RH front lower lateral link to the strut	106 Nm (78.2 lbs-ft)	21 mm socket	Reuse
Nuts (x3) that attach the front upper control arm mount to the RH front spring and damper assembly	23 Nm (17.0 lbs-ft)	13 mm socket	Reuse

Table 26. Torque Specifications: Bushing Bracket - Stabilizer Bar - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attach the front stabilizer bar to the LH front stabilizer bar link	98 Nm (72.3 lbs-ft)	Torx T40 bit 18 mm socket	Replace	1188387-00-A
Nuts to attach the LH front stabilizer bar bushing bracket to the front subframe	35 Nm (25.8 lbs-ft)	15 mm socket	Replace	1111145-00-A