2026-08-09

Seat Cushion - 3rd Row (7-Seat) (Remove and Replace)

Correction code 1306010102 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Open all doors and lower all windows.
  2. Move the LH and RH front seat forward.
  3. Press the shoulder switches on the 2nd row seats and push both 60 and 40 seats forward to position them into the easy entry mode.
  4. Pull the LH and RH release lever under the 3rd row seat cushion to release the cushion, and then disconnect the harness connector.

Install

  1. Connect the harness connector, and then install the 3rd row seat cushion and secure the latches.
  2. Move the 2nd row seats to original position.
  3. Move the LH and RH front seats to original position.
  4. Raise all windows and close all doors.