COWL SCREEN (Remove and Replace)
Correction code
1225010102
FRT
0.20
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Open the LH front door and lower the LH front window.
- Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
- Remove the LH and RH wiper arms and blades. See Wiper Arm and Blade - Driver (Remove and Replace).
- Disconnect the washer pump hose.
- Release the clips that attach the cowl screen panel to the vehicle, and then remove the cowl screen panel from the vehicle.
Install
- Position the cowl screen panel, and then fasten the clips that attach the cowl screen panel to the vehicle.
- Connect the washer pump hose.
- Install the LH and RH wiper arms and blades. See Wiper Arm and Blade - Driver (Remove and Replace).
- Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
- Raise the LH front window and close the LH front door.