Torque Specifications - Chassis

Table 1. Torque Specifications: REAR SUBFRAME SHEAR PLATE- FRONT - LEFT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Smaller bolts that attach the LH shear plate to the HV battery
64 Nm (47.2 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 13 mm socket
  • 3 in extension
  • 6 in extension
  • Flex head ratchet/flex head torque wrench
Reuse
Larger bolt that attaches the LH shear plate and rear subframe to the body
125 Nm (92.2 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 3 in extension
  • 21 mm socket
  • Ratchet/torque wrench
Reuse
Table 2. Torque Specifications: GUID-23AA720D-7648-419B-B404-C8034585D705.html
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attach the steering column to the steering gear assembly
18 Nm (13.3 lbs-ft)
  • Ratchet 1/4in Dr Std
  • Socket 1/4in Dr. 6pt. Std. x 13mm
Replace 1111523-00-A
Bolts (x4) that attach the front end carrier to the LH and RH subframe crash cans
16 Nm (11.8 lbs-ft)
  • 13 mm socket
Reuse
Bolt that attaches the LH front brake hose bracket to the LH front knuckle
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 4 in extension
  • 10 mm socket
  • Ratchet/torque wrench
Reuse
Bolts (x2) that attach the LH front brake caliper to the LH front knuckle
94 Nm (69.3 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • External Torx E18
  • Ratchet/torque wrench
Replace 1088969-00-B
Bolt that attaches the LH front ABS wheel speed sensor to the knuckle
5 Nm (3.7 lbs-ft)
  • Torx T30 socket
  • Cordless Ratchet/Impact Driver
  • Flex head ratchet/flex head torque wrench
  • 4 in extension
Reuse
Nut that attach the LH tie rod outer assembly to LH front knuckle
180 Nm (132.7 lbs-ft)
  • 22 mm deep socket
Replace 1109263-00-A
Bolt and a new nut that attach the LH front upper control arm to the knuckle
56 Nm (41.3 lbs-ft)
  • 15 mm socket
  • Torx T50 socket
Replace 1111145-00-A
Nuts that attach the LH and RH front lower lateral links to the struts
106 Nm (78.2 lbs-ft)
  • 21 mm socket
Reuse
Bolt that attaches the front drive unit ground strap to the front drive unit
10 Nm (7.4 lbs-ft)
  • 10 mm socket
Reuse
Bolt that attaches the front drive unit HV harness to the front drive unit
10 Nm (7.4 lbs-ft)
  • 10 mm socket
Reuse
Larger bolts (x2) that attach the rear portion of the front subframe to the body
125 Nm (92.2 lbs-ft)
  • SKT, 1/2" DR, SHALLOW, 21MM - 1115108-00-B
  • Breaker bar
  • Torque wrench with angle measurement
Replace 1456640-00-A
Bolts that attaches the LH and RH motor mounts to the body
105 Nm (77.4 lbs-ft)
  • External Torx E18
  • Torque wrench with angle measurement
Reuse
Smaller bolts (x2) that attach the rear portion of the front subframe to the body
50 Nm (36.9 lbs-ft)
  • 15 mm socket
  • Torque wrench with angle measurement
Replace 1461654-00-A
Bolts (x2) that attach the front portion of the front subframe to the body
72 Nm (53.1 lbs-ft)
  • 18 mm socket
Replace 1461643-00-A
Bolts (x2) that attach the middle portion of the front subframe to the body
50 Nm (36.9 lbs-ft)
  • 15 mm socket
Replace 1461652-00-A
Bolt that attaches the front motor mount to the front subframe
80 Nm (59.0 lbs-ft)
  • 18 mm socket
  • Torque wrench with angle measurement
Reuse
Bolts that attaches the LH and RH front brake rotors to the knuckles
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 2 in extension
  • 10 mm deep socket
  • Ratchet/torque wrench
Reuse
Bolts (x2) that attach the LH front subframe crash can to the front subframe
53 Nm (39.1 lbs-ft)
  • 15 mm deep socket
Reuse
Bolts (x2) that attach the RH front subframe crash can to the front subframe
53 Nm (39.1 lbs-ft)
  • 15 mm deep socket
Reuse
Inner bolts (x2) that attach the steering gear assembly to the front subframe
75 Nm (55.3 lbs-ft)
  • 18 mm socket
Reuse
Outer bolts (x2) that attach the steering gear assembly to the front subframe
47 Nm (34.7 lbs-ft)
  • 15 mm socket
Reuse
Bolt and nut that attach the LH front lower compliance link to the front subframe
115 Nm (84.8 lbs-ft)
  • 21 mm socket
Reuse
Bolts (x2) that attach the LH front lower lateral link to the front subframe
135 Nm (99.6 lbs-ft)
  • 21 mm socket
Replace 1109912-00-B
Table 3. Torque Specifications: FRONT SUBFRAME (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attach the steering column to the steering gear assembly
18 Nm (13.3 lbs-ft)
  • Ratchet 1/4in Dr Std
  • Socket 1/4in Dr. 6pt. Std. x 13mm
Replace 1111523-00-A
Bolts (x4) that attach the front end carrier to the LH and RH subframe crash cans
16 Nm (11.8 lbs-ft)
  • 13 mm socket
Reuse
Nut that attach the LH tie rod outer assembly to LH front knuckle
180 Nm (132.7 lbs-ft)
  • 22 mm deep socket
Replace 1109263-00-A
Nuts that attach the LH and RH front lower lateral links to the struts
106 Nm (78.2 lbs-ft)
  • 21 mm socket
Reuse
Larger bolts (x2) that attach the rear portion of the front subframe to the body
125 Nm (92.2 lbs-ft)
  • SKT, 1/2" DR, SHALLOW, 21MM - 1115108-00-B
  • Breaker bar
  • Torque wrench with angle measurement
Replace 1456640-00-A
Smaller bolts (x2) that attach the rear portion of the front subframe to the body
50 Nm (36.9 lbs-ft)
  • 15 mm socket
  • Torque wrench with angle measurement
Replace 1461654-00-A
Bolts (x2) that attach the front portion of the front subframe to the body
72 Nm (53.1 lbs-ft)
  • 18 mm socket
Replace 1461643-00-A
Bolts (x2) that attach the middle portion of the front subframe to the body
50 Nm (36.9 lbs-ft)
  • 15 mm socket
Replace 1461652-00-A
Bolts that attaches the LH and RH front brake rotors to the knuckles
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 2 in extension
  • 10 mm deep socket
  • Ratchet/torque wrench
Reuse
Bolts (x2) that attach the LH front subframe crash can to the front subframe
53 Nm (39.1 lbs-ft)
  • 15 mm deep socket
Reuse
Bolts (x2) that attach the RH front subframe crash can to the front subframe
53 Nm (39.1 lbs-ft)
  • 15 mm deep socket
Reuse
Inner bolts (x2) that attach the steering gear assembly to the front subframe
75 Nm (55.3 lbs-ft)
  • 18 mm socket
Reuse
Outer bolts (x2) that attach the steering gear assembly to the front subframe
47 Nm (34.7 lbs-ft)
  • 15 mm socket
Reuse
Bolt and nut that attach the LH front lower compliance link to the front subframe
115 Nm (84.8 lbs-ft)
  • 21 mm socket
Reuse
Bolts (x2) that attach the LH front lower lateral link to the front subframe
135 Nm (99.6 lbs-ft)
  • 21 mm socket
Replace 1109912-00-B