2025-05-23
Speaker Grill - Instrument Panel (Remove and Replace)
Correction code
1405012202
0.25
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Remove the speaker grille. See Speaker Grill - Instrument Panel (Remove and Install).
Install
- Install the speaker grille. See Speaker Grill - Instrument Panel (Remove and Install).
- Enable Service Mode and unlock the gateway. See Gateway (Unlock).
-
Perform the following routine using
Service Mode or Toolbox:
-
PROC_VC_X_RGB-LIGHTS-ADDRESSINGvia Toolbox: (link)via Service Mode:
- Low Voltage ➜ Interior Lighting ➜ Address RGB Lights
- Mid Voltage ➜ Interior Lighting ➜ Address RGB Lights
-
PROC_VC_X_RGB-LIGHTS-ADDRESSINGvia Toolbox: (link)via Service Mode:
- Reinstall the software and disable Service Mode. See Software Reinstall - Touchscreen.