Harness - Cushion - Seat - 3rd Row (Model YL) (Remove and Replace)
Correction code
17103000602
FRT
0.18
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the 3rd row seat cushion. See Cushion - Seat - 3rd Row (Model YL) (Remove and Replace).
-
Disconnect the 3rd row seat USB hub
connector.
-
Disconnect the 3rd row LH occupant
switch connector, and then release the clip that attaches the harness to the cushion
assembly.
-
Disconnect the 3rd row LH heat pad
connector.
- Repeat step 3 and step 4 on the right side of the 3rd row seat harness.
-
Release the clips (x2) and hooks (x7) that attach the 3rd row seat harness to the
cushion assembly, and then remove the harness from the cushion assembly.
NoteThe number of the clips and hooks may vary.
Install
-
Install the clips (x2) and hooks (x7) that attach the 3rd row seat harness to the
cushion assembly.
NoteThe number of the clips and hooks may vary.
-
Connect the 3rd row LH occupant switch
connector, and then install the clip that attaches the harness to the cushion
assembly.
-
Connect the 3rd row LH heat pad
connector.
- Repeat step 2 and step 3 on the right side of the 3rd row seat harness.
-
Connect the 3rd row seat USB hub
connector.
- Install the 3rd row seat cushion. See Cushion - Seat - 3rd Row (Model YL) (Remove and Replace).