2026-06-02

Wheels - Turbine Aero Insert Kit - Set (Install)(Model YL) (Installation)

Correction code 34010100026 FRT 0.36 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Install

  1. Remove the protective packing bags from the new turbine aero inserts (x7).
  2. Clean the turbine aero inserts (x7) with IPA wipes, allowing 1 minute to dry.
  3. Install the turbine aero inserts (x7) to the LH front wheel, ensuring all 28 clips (4 per insert) are fully seated.
    Informational PurposesAn informational icon, calling your attention
    Note
    Place the insert with holes at the valve core position.
  4. Repeat step 1 to 3 to install the turbine aero inserts on the RH front, LH rear, and RH rear wheels respectively.