2026-02-28

Harness - Seat Cushion - 3rd Row Seat (7-Seat) (Remove and Replace)

Correction code 1710080401 1710080402 FRT 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the 3rd row seat cushion. See Seat Cushion - 3rd Row (7-Seat) (Remove and Replace).
  2. Disconnect the LH side of the seat cushion harness connector.
  3. Remove the rear USB assembly. See Rear USB (Remove and Replace).
  4. Disengage the retainers that attach the middle of the harness to the seat cushion assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    2x retainers, 1x cloth retainer
  5. Disconnect the RH side of the connector and disengage the retainers (x4) that attach the rear side of the harness to the seat cushion assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    After disconnecting the retainers, carefully remove harness from cushion by maneuvering around the retainers.

Install

  1. Connect the RH side of the connector, and then engage the retainers (x4) that attach the rear side of the harness to the seat cushion assembly.
  2. Re-engage the retainers that attach the middle of the harness to the seat cushion assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    2x retainers, 1x cloth retainer
  3. Install the rear USB assembly. See Rear USB (Remove and Replace).
  4. Reconnect the LH side of the seat cushion harness connector.
  5. Install the 3rd row seat cushion. See Seat Cushion - 3rd Row (7-Seat) (Remove and Replace).