RUCKET BRACKET - LEFT HAND (Remove and Replace)
Correction code
1530050302
FRT
0.05
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the LH load floor bracket. See Bracket - Load Floor - LH (Remove and Replace).
- Use a plastic trim tool to release the clips (x2) that attach the LH trunk rucket bracket to the body, and then remove the bracket from the vehicle.
Install
- Position the LH rucket bracket to the vehicle, and then install the clips (x2) that attach the bracket to the body.
- Install the LH load floor bracket. See Bracket - Load Floor - LH (Remove and Replace).