Instrument Panel - Air Wave Duct - RH (Remove and Install)
Correction code
1405030701
FRT
0.24
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the passenger footwell duct. See Instrument Panel - Passenger Footwell Duct (Remove and Replace).
-
Disconnect the RH instrument panel air
wave duct thermistor connector.
-
Remove the clips (x2) that attach the
RH air wave duct to the instrument panel carrier.
-
Remove the RH air wave duct from the
HVAC module.
Install
-
Install the RH air wave duct to the
HVAC module.
-
Install the clips (x2) that attach the RH air wave duct to the instrument panel
carrier.
- Install the passenger footwell duct. See Instrument Panel - Passenger Footwell Duct (Remove and Replace).