Table 1. Torque Specifications: INSTRUMENT PANEL - AIR VENT - DRIVER (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x5) that attach the LH air vent to the instrument panel upper assembly	0.9 Nm (8 lbs-in)	Torx T20 bit Digital Torque Screwdriver 0.10Nm - 2.0Nm	Reuse

Table 2. Torque Specifications: Assembly - Instrument Panel - Lower (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screw that attaches the instrument panel lower assembly to the instrument panel carrier	2.3 Nm (1.7 lbs-ft)	Torx T20 bit	Reuse

Table 3. Torque Specifications: Assembly - Instrument Panel - Upper (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the instrument panel carrier to the cross car beam near the passenger airbag	8 Nm (5.9 lbs-ft)	External Torx E10	Replace	1112138-00-C
Screws that attach the instrument panel carrier to the cross car beam	2.3 Nm (1.7 lbs-ft)	Torx T20 bit	Reuse

Table 4. Torque Specifications: INSTRUMENT PANEL - CROSS CAR BEAM (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts (x4) that attach the steering column to the cross car beam	15 Nm (11.1 lbs-ft)	13 mm deep socket	Reuse
Bolts that attach the cross car beam to the A-pillar	29 Nm (21.4 lbs-ft)	13 mm deep socket	Reuse
Bolts that attach the cross car beam to the HVAC assembly	5.5 Nm (4.1 lbs-ft)	10 mm socket	Reuse
Bolt that attaches the cross car beam to the upper cowl	25 Nm (18.4 lbs-ft)	Combination Wrench 12pt 13mm 3/8in Dr. Open Crowfoot Socket x 13mm	Reuse
Bolts that attach the cross car beam to the body	25 Nm (18.4 lbs-ft)	13 mm deep socket	Reuse

Table 5. Torque Specifications: Dash Support Frame - Display Neck - Service Panel (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the cabin temperature sensor to the service panel	0.7 Nm (6 lbs-in)	Torx T20 bit	Reuse

Table 6. Torque Specifications: IP, DEFROST COVER, LEFT HAND (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x2) that attach the LH defrost duct to the instrument panel upper assembly	0.9 Nm (8 lbs-in)	Torx T20 bit Digital Torque Screwdriver 0.10Nm - 2.0Nm	Reuse

Table 7. Torque Specifications: INSTRUMENT PANEL - GLOVE BOX (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x4) securing glove box assembly to IP carrier	2.3 Nm (1.7 lbs-ft)	Torx T20 socket	Reuse

Table 8. Torque Specifications: INSTRUMENT PANEL RISER - LEFT HAND (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
10mm bolt that secures the LH instrument panel riser bracket	6 Nm (4.4 lbs-ft)	10 mm deep socket	Reuse
13mm bolt and nut that secure the LH instrument panel riser bracket	25 Nm (18.4 lbs-ft)	13 mm socket	Reuse

Table 9. Torque Specifications: INSTRUMENT PANEL RISER - RIGHT HAND (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt and nut that secure the RH instrument panel riser bracket	25 Nm (18.4 lbs-ft)	13 mm socket	Reuse

Table 10. Torque Specifications: INSTRUMENT PANEL - STEERING COLUMN GAP HIDER - LOWER (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) securing gap hider lower to steering column	1.4 Nm (1.0 lbs-ft)	Torx T25 socket	Reuse

Table 11. Torque Specifications: Support Bracket - Display - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x2) that secure the LH display support bracket	3 Nm (2.2 lbs-ft)	Torx T20 bit	Reuse

Table 12. Torque Specifications: Knee Impact Foam - Instrument Panel- LH (Remove and Replace)/Knee Impact Foam - Instrument Panel- RH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x3) securing IP assembly to cross car beam on lower LH side	2.3 Nm (1.7 lbs-ft)	Torx T20 bit	Reuse