Access Panel (Remove and Replace)
Correction code
1224010102
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.NOTE:
See Ergonomic Precautionsfor safe
and healthy working practices.
Remove
- Open the LH front door and lower the LH front window.
- Open the hood.
-
Release the clips (x3), the
guide tabs (x3) and the connector that attach the access panel to the
vehicle.
Install
-
Connect the connector, and
then install the clips (x3) and the guide tabs (x3) that attach the access
panel to the vehicle.
- Close the hood.
- Raise the LH front window and close the LH front door.