2025-03-12

Rear View Mirror (Remove and Replace)

Correction code 1505010302 FRT 0.05 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the lower camera cover. See Quad Camera Cover Lower - HW4 (Remove and Replace).
  2. Disconnect the rear view mirror electrical connector.
  3. Grip the rear view mirror stalk, and then turn clockwise to release the rear view mirror.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not turn the rear view mirror itself.

Install

  1. Grip the rear view mirror stalk, and then turn counterclockwise to install the rear view mirror.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not turn the rear view mirror itself.
  2. Connect the rear view mirror electrical connector.
  3. Install the lower camera cover. See Quad Camera Cover Lower - HW4 (Remove and Replace).