Torque Specifications - Brakes

Table 1. Torque Specifications: FRONT CALIPER LEFT HAND - NO PADS (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the LH front brake caliper to the knuckle
94 Nm (69.3 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • External Torx E18
  • Breaker bar
  • 3/8 in to ½ in adapter
  • Ratchet/torque wrench
Replace 1088969-00-B
Table 2. Torque Specifications: BRAKE CALIPER - REAR - LEFT HAND - BASE (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH rear EPB harness bracket to the LH rear caliper
5 Nm (3.7 lbs-ft)
  • 4 in extension
  • 10 mm socket
  • Cordless Ratchet/Impact Driver
  • Ratchet/torque wrench
Reuse
Bolts (x2) that attach the LH rear brake caliper to the knuckle
83 Nm (61.2 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 3/8 in to ½ in adapter
  • External Torx E18
  • Breaker bar
  • Ratchet/torque wrench
Replace
Table 3. Torque Specifications: PIPE - BRAKE - MASTER CYLINDER TO HYDRAULIC CONTROL UNIT - LEFT HAND DRIVE (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the steering column to the steering gear assembly
18 Nm (13.3 lbs-ft)
  • 13 mm deep socket
  • Flex head ratchet/flex head torque wrench
Replace 1111523-00-A
A/C compressor ground strap bolt
7 Nm (5.2 lbs-ft)
  • Flex head ratchet/flex head torque wrench
  • 10 in extension
  • Torx T25 socket
  • Cordless Ratchet/Impact Driver
Reuse
Bolts (x2) that attach the compressor to the shock tower brace
31 Nm (22.9 lbs-ft)
  • Flex head ratchet/flex head torque wrench
  • 15 mm deep socket
  • Cordless Ratchet/Impact Driver
Reuse
Nuts that attach the master cylinder primary/secondary pipe to the brake booster/HCU
16 Nm (11.8 lbs-ft)
  • 12 mm 6-point flare nut wrench
  • Ratchet/torque wrench
  • 12 mm 6-point flare nut crowfoot socket (mount at 90 degrees)
Reuse
Table 4. Torque Specifications: PIPE L - REAR BRAKE (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes

LH rear brake line tube outer nut

Nut that attaches the LH rear brake line to the LH rear brake hose

16 Nm (11.8 lbs-ft)
  • 12 mm 6-point flare nut wrench
  • Ratchet/torque wrench
  • 12 mm 6-point flare nut crowfoot socket (mount at 90 degrees)
Reuse
Table 5. Torque Specifications: Brake Pad Kit - Front (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH front brake hose bracket to the knuckle
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 4 in extension
  • 10 mm socket
  • Ratchet/torque wrench
Reuse
Bolts (x2) that attach the LH front brake caliper to the knuckle
94 Nm (69.3 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • External Torx E18
  • Breaker bar
  • 3/8 in to ½ in adapter
  • Ratchet/torque wrench
Replace 1088969-00-B
Table 6. Torque Specifications: Brake Pad Kit - Rear (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the LH rear brake caliper to the LH rear brake caliper bracket
26.5 Nm (19.5 lbs-ft)
  • 14 mm socket
  • Flex head ratchet/flex head torque wrench
  • Combination Wrench 12pt 17mm
Reuse
Table 7. Torque Specifications: PIPE FRONT - BRAKE (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the steering column to the steering gear assembly
18 Nm (13.3 lbs-ft)
  • 13 mm deep socket
Replace 1111523-00-A
Nuts (x4) that attach the 4-tube brake pipe bundle to the HCU
18 Nm (13.3 lbs-ft)
  • 12 mm socket
Reuse
Nut that attaches the front brake line to the front brake hose
16 Nm (11.8 lbs-ft)
  • 12 mm socket
Reuse
Nut that attaches the front brake hose to the vehicle
6 Nm (4.4 lbs-ft)
  • 10 mm 12-point deep socket
Reuse
Nuts (x2) that attach the brake pipes to the coupling
16 Nm (11.8 lbs-ft)
  • 12 mm socket
  • 13 mm socket
Reuse
Table 8. Torque Specifications: PIPE R - REAR BRAKE (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes

LH rear brake line tube inner nut

Nut that attaches the RH rear brake line to the RH rear brake hose

16 Nm (11.8 lbs-ft)
  • 12 mm 6-point flare nut wrench
  • Ratchet/torque wrench
  • 12 mm 6-point flare nut crowfoot socket (mount at 90 degrees)
Reuse
Table 9. Torque Specifications: Brake Rotor - Rear - Base - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the LH rear brake caliper to the LH rear knuckle
83 Nm (61.2 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • External Torx E18
  • 3 in extension
  • Ratchet/torque wrench
Replace
Bolt that attaches the LH rear brake rotor to the hub
5 Nm (3.7 lbs-ft)
  • 10 mm socket
  • Cordless Ratchet/Impact Driver
  • 2 in extension
Reuse
Table 10. Torque Specifications: FRONT BRAKE SHIELD - LEFT HAND (Remove and Replace) / BRAKE SHIELD - REAR- LEFT HAND - BASE (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x3) that attach the LH front/rear brake shield to the knuckle
8 Nm (5.9 lbs-ft)
  • 4 in extension
  • Torx T30 bit
  • DRIVER KIT, 1/4" HEX, M12
  • Ratchet/torque wrench
Reuse
Table 11. Torque Specifications: Calipers and Pads - Front Brake Rotor - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH front brake hose bracket to the LH front knuckle
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 4 in extension
  • 10 mm socket
  • Ratchet/torque wrench
Reuse
Bolts (x2) that attach the LH front brake caliper to the LH front knuckle
94 Nm (69.3 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • External Torx E18
  • Ratchet/torque wrench
Replace 1088969-00-B
Bolt that attaches the LH front brake rotor to the knuckle
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 2 in extension
  • 10 mm deep socket
  • Ratchet/torque wrench
Reuse
Table 12. Torque Specifications: Clean And Lubricate Brake Calipers (Non-Performance Brakes)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH front brake hose bracket to the knuckle
5 Nm (3.7 lbs-ft)
  • 10 mm socket
Reuse
Bolts (x2) that attach the LH front brake caliper to the LH front knuckle
94 Nm (69.3 lbs-ft)
  • External Torx E18
Replace 1088969-00-B
Bolts (x2) that attach the LH rear brake caliper to the LH rear brake caliper bracket
26.5 Nm (19.5 lbs-ft)
  • 14 mm socket
Reuse
Bolts (x2) that attach the LH rear brake caliper bracket to the LH rear knuckle
83 Nm (61.2 lbs-ft)
  • External Torx E18
Replace 1088969-00-B
Table 13. Torque Specifications: EPB HARNESS LEFT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH rear EPB harness bracket to the LH rear caliper
5 Nm (3.7 lbs-ft)
  • 4 in extension
  • 10 mm socket
  • Cordless Ratchet/Impact Driver
  • Ratchet/torque wrench
Reuse
Bolt that attaches the LH rear EPB harness to the LH rear brake hose bracket
6 Nm (4.4 lbs-ft)
  • 10 mm deep socket
  • Cordless Ratchet/Impact Driver
  • Ratchet/torque wrench
Reuse
Table 14. Torque Specifications: BRAKE HOSE - FRONT - LEFT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH front brake hose bracket to the knuckle
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 4 in extension
  • 10 mm socket
  • Ratchet/torque wrench
Reuse
Bolt that attaches the LH front brake hose to the LH front brake caliper
42 Nm (31.0 lbs-ft)
  • Flex head ratchet/flex head torque wrench
  • 11 mm deep socket
Replace 2288725-00-A
Nut that attaches the LH front brake line to the LH front brake hose
16 Nm (11.8 lbs-ft)
  • 12 mm 6-point flare nut wrench
  • Ratchet/torque wrench
  • 12 mm 6-point flare nut crowfoot socket (mount at 90 degrees)
Reuse
Nut that attaches the LH front brake hose to the vehicle
6 Nm (4.4 lbs-ft)
  • 4 in extension
  • 10 mm deep socket
  • Ratchet/torque wrench
Reuse
Table 15. Torque Specifications: BRAKE HOSE - REAR - LEFT HAND - BASE (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH rear brake hose to the LH rear brake caliper
42 Nm (31.0 lbs-ft)
  • Flex head ratchet/flex head torque wrench
  • 11 mm socket
Replace 1188735-00-A
Nut that attaches the LH rear brake line to the LH rear brake hose
16 Nm (11.8 lbs-ft)
  • 12 mm 6-point flare nut wrench
  • Ratchet/torque wrench
  • 12 mm 6-point flare nut crowfoot socket (mount at 90 degrees)
Reuse
Bolt that attaches the LH rear EPB harness to the LH rear brake hose bracket
6 Nm (4.4 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 10 mm deep socket
  • Ratchet/torque wrench
Reuse
Bolt that attaches the LH rear brake hose to the vehicle
15 Nm (11.1 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 10 mm deep socket
  • Ratchet/torque wrench
Reuse
Table 16. Torque Specifications: Hydraulic Control Unit (HCU) - Brake (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the steering column to the steering gear assembly
18 Nm (13.3 lbs-ft)
  • 13 mm deep socket
Replace 1111523-00-A
Bolt that secures the A/C compressor ground strap
7 Nm (5.2 lbs-ft)
  • Torx T25 socket
Reuse
Bolts (x2) that attach the compressor and bracket assembly to the shock tower brace
31 Nm (22.9 lbs-ft)
  • 15 mm deep socket
Reuse

Nuts (x4) that attach the 4-tube bundle brake pipes to the HCU

Nut that attaches the master cylinder secondary pipe to the HCU

Nut that attaches the master cylinder primary pipe to the HCU

18 Nm (13.3 lbs-ft)
  • 12 mm 6-point flare nut wrench
Reuse
Bolts (x2) that attach the HCU to frame rail
10 Nm (7.4 lbs-ft)
  • 10 mm socket
Reuse
Grommet nuts (x2) that attach the HCU to the HCU bracket
8 Nm (5.9 lbs-ft)
  • 10 mm deep socket
Reuse
Table 17. Torque Specifications: BRAKE PIPE JUNCTION BLOCK (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
LH rear brake line tube outer/inner nut
16 Nm (11.8 lbs-ft)
  • 12 mm socket
  • Ratchet/torque wrench
  • 12 mm 6-point flare nut wrench
  • ¼ in to 3/8 in adapter
Reuse
Nut that attaches the LH rear junction block to the body
6 Nm (4.4 lbs-ft)
  • 4 in extension
  • 10 mm socket
  • Cordless Ratchet/Impact Driver
  • Flex head ratchet/flex head torque wrench
Reuse
Table 18. Torque Specifications: Sensor - Wheel Speed - ABS - Front - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH front ABS wheel speed sensor to the knuckle
5 Nm (3.7 lbs-ft)
  • Torx T30 socket
  • Cordless Ratchet/Impact Driver
  • Flex head ratchet/flex head torque wrench
  • 4 in extension
Reuse
Table 19. Torque Specifications: Sensor - Wheel Speed - Rear - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH rear ABS wheel speed sensor to the knuckle
5 Nm (3.7 lbs-ft)
  • Torx T30 socket
  • Flex head ratchet/flex head torque wrench
  • 4 in extension
Reuse
Table 20. Torque Specifications: Brake Shield - Front - LH (Dual Motor) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x3) that attach the LH front brake shield to the knuckle
8 Nm (5.9 lbs-ft)
  • Torx T30 socket
  • Torque wrench with angle measurement
Reuse
Table 21. Torque Specifications:BRAKE PEDAL - BASE (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Accelerator pedal bolt (X1)
7 Nm (5.2 lbs-ft)
  • Torx T30 socket
  • Cordless Ratchet/Impact Driver
Reuse
Bolts (X5) securing brake pedal assembly
16.5 Nm (12.2 lbs-ft)
  • Ratchet/torque wrench
  • 13 mm deep socket
Replace
Table 22. Torque Specifications: Brake Rotor - Front - LH (Measure Runout)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts that attach the brake rotor camping plate to the rotor
100 Nm (73.7 lbs-ft)
  • 21 mm deep socket
Reuse
Bolt that attaches the front rotor to the knuckle
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 2 in extension
  • 10 mm deep socket
  • Ratchet/torque wrench
Reuse
Table 23. Torque Specifications: Brake Rotor - Rear - LH (Measure Runout)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts that attach the brake rotor camping plate to the rotor
100 Nm (73.7 lbs-ft)
  • 21 mm deep socket
Reuse
Bolt that attaches the LH rear brake rotor to the hub
5 Nm (3.7 lbs-ft)
  • 10 mm socket
  • Cordless Ratchet/Impact Driver
  • 2 in extension
Reuse
Table 24. Torque Specifications: Electromechanical Brake Booster Assembly (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Nut that attaches the master cylinder secondary pipe from the brake booster
16 Nm (11.8 lbs-ft)
  • 12 mm 6-point flare nut crowfoot socket (mount at 90 degrees)
Reuse
Nut that attaches the master cylinder primary pipe from the brake booster.
16 Nm (11.8 lbs-ft)
  • 12 mm 6-point flare nut crowfoot socket (mount at 90 degrees)
Reuse
Nuts (x2) that attach the brake assembly to the bulkhead
16.5 Nm (12.2 lbs-ft)
  • 13 mm deep socket
  • Torque wrench with angle measurement
Replace 1111541-00-A
Table 25. Torque Specifications:
Description Torque Value Recommended Tools Reuse/Replace Notes
Nut that attaches the master cylinder secondary pipe from the brake booster
18 Nm (13.3 lbs-ft)
  • 12 mm 6-point flare nut crowfoot socket (mount at 90 degrees)
Reuse
Nut that attaches the master cylinder primary pipe from the brake booster.
18 Nm (13.3 lbs-ft)
  • 12 mm 6-point flare nut crowfoot socket (mount at 90 degrees)
Reuse
Nuts (x2) that attach the rear brake lines
18 Nm (13.3 lbs-ft)
  • 12 mm 6-point flare nut crowfoot socket (mount at 90 degrees)
Reuse
Nuts (x2) that attach the brake assembly to the bulkhead
16.5 Nm (12.2 lbs-ft)
  • 13 mm deep socket
  • Torque wrench with angle measurement
Replace 1111541-00-A