Torque Specifications - Interior Trim

Table 1. Torque Specifications: QUAD CAM CVR UPR (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x2) that attach the interior camera to the upper camera cover
0.8 Nm (7 lbs-in)
  • Torx T10 bit
  • BALL TORX, HAND DRIVER, T10
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
Replace 1919198-00-A
Table 2. Torque Specifications: COAT HOOK and MAP LIGHT - LEFT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Coat hook screw
2.5 Nm (1.8 lbs-ft)
  • 2 in extension
  • Torx T25 bit
  • Ratchet/torque wrench
  • Wurth ¼ in hexagon 1 Nm - 5 Nm torque wrench (installation only)
Reuse
Screw that attaches the LH front headliner to the body tether
2 Nm (1.5 lbs-ft)
  • Torx T30 bit
  • Ratchet/torque wrench
  • Wurth ¼ in hexagon 1 Nm - 5 Nm torque wrench (installation only)
Reuse
Screws (x7) that attach the LH coat hook and map light assembly to the vehicle
1 Nm (.7 lbs-ft)
  • Torx T20 bit
  • Ratchet/torque wrench
  • Wurth ¼ in hexagon 1 Nm - 5 Nm torque wrench (installation only)
Reuse
Table 3. Torque Specifications: Panel - Door Trim - Front - LH (LHD) (Remove and Replace) and DOOR - NOISE VIBRATION HARNESS PAD - FRONT LEFT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x3) that attach the trim panel to the LH front door
6 Nm (4.4 lbs-ft)
  • Torx T30 socket
Reuse
Table 4. Torque Specifications: 2.0 - CONSOLE (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the rear part of the center console to the body
7 Nm (5.2 lbs-ft)
  • 10 mm socket
Reuse
Bolts (x2) that attach the RH front part of the center console to the body
7 Nm (5.2 lbs-ft)
  • 10 mm socket
Reuse
Bolts (x2) that attach the LH front part of the center console to the body
7 Nm (5.2 lbs-ft)
  • 10 mm socket
Reuse
Table 5. Torque Specifications: CONSOLE - REAR AIR VENT PAN - PREMIUM (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x2) that attach the air wave assembly to the vent cover panel
0.8 Nm (7 lbs-in)
  • Torx T20 socket
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
Reuse
Table 6. Torque Specifications: FRONT HEADLINER (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Coat hook screw
2.5 Nm (1.8 lbs-ft)
  • 2 in extension
  • Torx T25 bit
  • Ratchet/torque wrench
  • Wurth ¼ in hexagon 1 Nm - 5 Nm torque wrench (installation only)
Reuse
Screw that attaches the LH front headliner to the body tether
2 Nm (1.5 lbs-ft)
  • Torx T30 bit
  • Ratchet/torque wrench
  • Wurth ¼ in hexagon 1 Nm - 5 Nm torque wrench (installation only)
Reuse
Table 7. Torque Specifications: INDUCTIVE CHARGER MODULE - GENERATION 2 (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes

Screws (x2) that attach the phone dock and charger module assembly to the center console

Screws (x3) that attach the inductive charger module to the phone dock

1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Ratchet/torque wrench
  • 2 in extension
Reuse
Table 8. Torque Specifications: SUN VISOR - LEFT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screw that attaches the sun visor to the vehicle
3.5 Nm (2.6 lbs-ft)
  • Ratchet/torque wrench
  • Torx T25 bit
  • 4 in extension
Reuse
Table 9. Torque Specifications: CONSOLE LAMP SWITCH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screw that attaches the rear lamp switch to the center console
1.2 Nm (.9 lbs-ft)
  • SET, 1/2" CUT BIT. (78 PCS DOUBLE END MINI RATCHET)
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
Reuse
Table 10. Torque Specifications: CABIN CARPET - FRONT - LEFT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x4) that attach the driver seat to body
33.5 Nm (24.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • Torx Plus TP45 Bit Socket
  • Ratchet/torque wrench
Replace
Table 11. Torque Specifications: Panel - Door Trim - Rear - LH (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the LH rear door trim panel to the door
6 Nm (4.4 lbs-ft)
  • Ratchet/torque wrench
  • 4 in extension
  • Torx T30 socket
Reuse
Table 12. Torque Specifications: WHEELHOUSE INSULATOR - FRONT - LEFT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that closes the charge port busbar access door at the ancillary bay HV header
9 Nm (6.6 lbs-ft)
  • Insulated tools:
    • 10 mm socket
Reuse
Bolts (x2) that attach the charge port busbar to the ancillary bay HV header
9 Nm (6.6 lbs-ft)
  • Insulated tools:
    • 10 mm socket
Reuse
Table 13. Torque Specifications: 2.0 CONSOLE - SLIDING BIN LID (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x12) that attach the sliding door assembly to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 socket
  • 2 in extension
  • Cordless Ratchet/Impact Driver
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
Reuse
Table 14. Torque Specifications: CONSOLE - REAR AIR VENT PAN (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the air wave assembly to the rear display module
1.2 Nm (.9 lbs-ft)
  • Torx T20 socket
  • Torque wrench with angle measurement
Replace 1096312-00-A
Screws (x2) that attach the air wave assembly to the vent cover panel
0.8 Nm (7 lbs-in)
  • Torx T20 socket
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
Reuse
Table 15. Torque Specifications: 2.5 CONSOLE - ARMREST (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x6) that attach the armrest to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 socket
  • Torque wrench with angle measurement
Reuse
Screws (x2) that attach the armrest to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 socket
  • Torque wrench with angle measurement
Reuse
Table 16. Torque Specifications: DOOR WINDOW SWITCH - PASSENGER (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches front lower bolt cover to vehicle
6 Nm (4.4 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • Ratchet/torque wrench
  • Torx T30 socket
Reuse
Table 17. Torque Specifications:C PILLAR AIRBAG RAMP - LEFT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
LH coathook screw
2.5 Nm (1.8 lbs-ft)
  • Ratchet/torque wrench
  • 4 in extension
  • Torx T25 socket
  • Torque wrench 1/4" hexagon (0.2Nm-4Nm) (Installation only)
Reuse
Bolt securing LH airbag ramp to body
5 Nm (3.7 lbs-ft)
  • Cordless Ratchet/Impact Driver
  • 10 mm socket
  • Ratchet; Wrench, Torque+Angle, 1/4" Dr.(Installation only)
Reuse
Table 18. Torque Specifications: DOOR - ELEC RELEASE - SWITCH - FRONT RIGHT (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the interior door handle to the door panel trim
1 Nm (.7 lbs-ft)
  • 2 in extension
  • Torx T20 bit
  • DRIVER KIT, 1/4" HEX, M12
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
Reuse
Table 19. Torque Specifications:ASSEMBLY - USB HUB (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts secure the VC USB to
1.1 Nm (.8 lbs-ft)
  • Torx T20 bit
  • DRIVER KIT, 1/4" HEX, M12
  • 4 in extension
Reuse
Table 20. Torque Specifications: Panel - Top Face - Center Console (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x4) that attach the top face panel to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
Reuse
Table 21. Torque Specifications:B PILLAR AIRBAG RAMP - LEFT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screw that attach the LH coat hook to the headliner
2.5 Nm (1.8 lbs-ft)
  • Torx T25 bit
Reuse
bolts (x2) that attach the LH B-pillar airbag ramp to the body
5 Nm (3.7 lbs-ft)
  • 10 mm deep socket
Reuse
Table 22. Torque Specifications: DOOR ELECTRIC RELEASE SWITCH - REAR LEFT HAND (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the interior door handle to the door panel trim
1 Nm (.7 lbs-ft)
  • Torx T20 bit
Reuse
Table 23. Torque Specifications: TIE DOWN ROD (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the LH tie down rod to the body
12 Nm (8.8 lbs-ft)
  • 10 mm socket
Reuse
Table 24. Torque Specifications: CloseOut - Center Console (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screw that secures the center console closeout assembly to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Torque wrench with angle measurement
Reuse
Table 25. Torque Specifications: Hinge - Armrest - Center Console (Remove and Replace) and Armrest - Outer - Center Console (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x4) that attach the armrest hinge to the outer armrest
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Torque wrench with angle measurement
Reuse