Torque Specifications - Electrical

Table 1. Torque Specifications: Camera - B-Pillar - LH (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x2) that attach the LH B-pillar camera to the LH B-pillar	0.45 Nm (4 lbs-in)	SET, 1/2" CUT BIT. (78 PCS DOUBLE END MINI RATCHET) Digital Torque Screwdriver 0.10Nm - 2.0Nm Torx T8 bit	Reuse

Table 2. Torque Specifications: Camera - Front Fascia (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Front fascia camera cover screws (x2)	4 Nm (2.9 lbs-ft)	Torx T20 socket Ratchet/torque wrench	Reuse
Screws (x2) that attach the front fascia camera to its housing	2 Nm (1.5 lbs-ft)	PH1 STUBBY PHILLIPS SCREWDRIVER Digital Torque Screwdriver 0.10Nm - 2.0Nm	Reuse

Table 3. Torque Specifications: ASSY, FORWARD BI-CAM (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x4) that attach the forward facing camera assembly to the windshield bracket	0.8 Nm (7 lbs-in)	BALL TORX, HAND DRIVER, T10 Torx T10 bit Digital Torque Screwdriver 0.10Nm - 2.0Nm	Reuse

Table 4. Torque Specifications: Camera - Rear Facing (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the rear facing camera to the cover	0.5 Nm (4 lbs-in)	Torx T8 bit Digital Torque Screwdriver 0.10Nm - 2.0Nm	Reuse

Table 5. Torque Specifications: TRAILER HITCH CONTROLLER (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the trailer hitch controller to the hitch assembly	6 Nm (4.4 lbs-ft)	10 mm socket	Reuse

Table 6. Torque Specifications: Ground Strap - Rear Defrost (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Rear defrost ground strap bolt	10 Nm (7.4 lbs-ft)	10 mm deep socket	Replace	1128269-00-A

Table 7. Torque Specifications: ASY,HARN,LIFTGATE,PREM,MY,GBL TL,RADIO (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Liftgate harness ground bolts	10 Nm (7.4 lbs-ft)	Flex head ratchet/flex head torque wrench 10 mm deep socket	Replace	Self-tapping tri-lobular bolt 1128269-00-A

Table 8. Torque Specifications: Lightbar - Front (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x4) that attach the front lightbar center assembly to the front end module	3.5 Nm (2.6 lbs-ft)	10 mm socket Ratchet/torque wrench 4 in extension Wiha Torque Screwdriver 0.8-5 Nm screwdriver (installation only)	Reuse

Table 9. Torque Specifications: 16V LI - ION BATTERY (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x3) that attach the LV battery to the vehicle	6 Nm (4.4 lbs-ft)	8 mm socket	Reuse

Table 10. Torque Specifications: LOW VOLTAGE CONTROLLER - LEFT HAND (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the ground harness to the LH A-pillar area	10 Nm (7.4 lbs-ft)	Flex head ratchet/flex head torque wrench 10 mm deep socket	Reuse
Bolt that attaches the LH body controller to the body	6 Nm (4.4 lbs-ft)	Flex head ratchet/flex head torque wrench 4 in extension 10 mm deep socket	Reuse

Table 11. Torque Specifications: ACCELERATOR PEDAL - BASE (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the accelerator pedal to the vehicle	7 Nm (5.2 lbs-ft)	Torx T30 bit Cordless Ratchet/Impact Driver	Reuse

Table 12. Torque Specifications: AUDIO SPEAKER SUPER HORN (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x3) that attach the super horn to the valance	1.8 Nm (1.3 lbs-ft)	Ratchet/torque wrench Torx T25 bit Digital Torque Screwdriver 0.10Nm - 2.0Nm	Reuse

Table 13. Torque Specifications: Wiper Arm and Blade - Driver (Remove and Replace) / Wiper Arm and Blade - Passenger (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Wiper arm nut	25 Nm (18.4 lbs-ft)	15 mm socket Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse

Table 14. Torque Specifications: Taillight - Liftgate (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (X4) that securing lamp to liftgate	3.5 Nm (2.6 lbs-ft)	Ratchet/torque wrench 10 mm socket	Reuse
Nuts (x2) and clip that securing lamp to liftgate	3.5 Nm (2.6 lbs-ft)	Cordless Ratchet/Impact Driver Ratchet/torque wrench	Reuse
Exterior bolts securing lamp to liftgate	3.5 Nm (2.6 lbs-ft)	10 mm socket Ratchet/torque wrench	Reuse

Table 15. Torque Specifications: Taillight - Rear Fascia - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (X3) to securing rear fascia LH lamp to rear fascia	2 Nm (1.5 lbs-ft)	Torx T25 socket Ratchet/torque wrench	Reuse

Table 16. Torque Specifications: Wiper Module (LHD) (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the wiper module to the vehicle	9 Nm (6.6 lbs-ft)	10 mm socket	Reuse

Table 17. Torque Specifications: Headlamp Assembly - Pair (Remove and Install) and
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x3) that attach the LH headlight to the body	3.5 Nm (2.6 lbs-ft)	10 mm socket	Reuse

Table 18. Torque Specifications: WASHER PUMP (Remove and Replace) and Reservoir - Windshield Washer (Remove and Replace) and WASHER LEVEL SENSOR (Remove and Install) and WASHER HOSE (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x3) that attach the washer reservoir to the front end carrier	4 Nm (2.9 lbs-ft)	10 mm socket	Reuse

Table 19. Torque Specifications: ASY. FRONT CONTROLLER GEN 3 (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the front body controller module cover to the front body controller module	8.5 Nm (6.3 lbs-ft)	10 mm socket	Reuse
Bolts (x2) that attach the harness guide to the front body controller module	6 Nm (4.4 lbs-ft)	8 mm socket	Replace	1137934-00-A
Bolts (x3) that attach the front body controller module to the body	10 Nm (7.4 lbs-ft)	10 mm socket	Reuse
Bolt that attaches the ground strap to the lower right side of the front body controller module	9 Nm (6.6 lbs-ft)	10 mm socket	Reuse

Table 20. Torque Specifications: RIGHT ELECTRONIC CONTROL UNIT GENERATION 3 - 5 SEAT - (NO ULTRASONIC SENSOR) (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the electrical harness to the RH A-pillar	10 Nm (7.4 lbs-ft)	10 mm socket	Reuse
Bolt that attaches the RH body control module to the body	6 Nm (4.4 lbs-ft)	10 mm socket	Reuse

Table 21. Torque Specifications: Fascia Bracket - Headlight - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x4) that attach the LH headlight bracket to the body	1.8 Nm (1.3 lbs-ft)	Torx T25 socket	Reuse

Table 22. Torque Specifications: RELATIVE HUMIDITY AND TEMPERATURE SENSOR (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x2) that attach the humidity and temperature sensor to the windshield bracket	0.12 Nm (1 lbs-in)	PRECISION PHILLIPS #00 Digital Torque Screwdriver 0.10Nm - 2.0Nm	Reuse

Table 23. Torque Specifications: Camera - Interior (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x2) that attach the interior camera to the camera upper cover	0.8 Nm (7 lbs-in)	Torx T10 bit Digital Torque Screwdriver 0.10Nm - 2.0Nm (installation only)	Replace

Table 24. Torque Specifications: REAR LEFT BLUETOOTH LOW ENERGY (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH corner of the rear fascia assembly to the body	3.5 Nm (2.6 lbs-ft)	10 mm socket	Reuse
Bolt that attaches the LH side of the rear fascia assembly to the body	2 Nm (1.5 lbs-ft)	8 mm socket	Reuse
Bolt that attaches LH corner of the rear fascia diffuser to the body	5 Nm (3.7 lbs-ft)	10 mm socket 4 in extension Ratchet/torque wrench	Reuse

Table 25. Torque Specifications: INTERIOR RADAR (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the interior radar to the body	10 Nm (7.4 lbs-ft)	10 mm deep socket	Reuse

Table 26. Torque Specifications: Module - BLE - Interior (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the BLE module to the vehicle	9 Nm (6.6 lbs-ft)	10 mm deep socket	Reuse

Table 27. Torque Specifications:
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x4) that attach the LH fascia bracket to the headlamp assembly	1.8 Nm (1.3 lbs-ft)	Torx T25 socket	Reuse

Table 28. Torque Specifications: Camera - Side Repeater - LH (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the LH front side repeater camera to the side repeater assembly	0.6 Nm (5 lbs-in)	Torx T8 bit Ratchet/torque wrench	Reuse

Table 29. Torque Specifications: GLOBAL HEADLAMP CONTROLLER (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x4) that attach the headlight controller to the headlight housing	2 Nm (1.5 lbs-ft)	Torx T20 socket Torque wrench with angle measurement	Reuse

Table 30. Torque Specifications:
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt securing ground harness to RH/LH A-pillar area	10 Nm (7.4 lbs-ft)	10 mm deep socket Ratchet/torque wrench	Reuse
Bolts (X2) securing harness guide to front LV controller	6 Nm (4.4 lbs-ft)	Ratchet/torque wrench 8 mm deep socket	Replace	1137934-00-B
Ground strap to front controller	9 Nm (6.6 lbs-ft)	Ratchet/torque wrench 10 mm deep socket	Reuse
Positive jumper post	8 Nm (5.9 lbs-ft)	Torque Wrench 1/4in Dr. + Angle - 1076971-02-A Cordless Ratchet/Impact Driver 10 mm deep socket SKT, 1/4" DR, E5 TORX EXTERNAL	Reuse
AC compressor ground strap	7 Nm (5.2 lbs-ft)	Ratchet/torque wrench Torx T25 socket Ratchet/torque wrench	Reuse
Front harness ground terminals at RH/LH front shock tower	10 Nm (7.4 lbs-ft)	Ratchet/torque wrench 10 mm deep socket	Replace	1128091-00-B

Table 31. Torque Specifications: Shield - Body Controller - Front (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the front body controller module shield to the front body controller module	8.5 Nm (6.3 lbs-ft)	10 mm socket	Reuse

Table 32. Torque Specifications：HARNESS - BODY LEFT - LEFT HAND DRIVE - PREMIUM (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt （X1) securing ground harness LH A-pillar area	10 Nm (7.4 lbs-ft)	10 mm deep socket Ratchet/torque wrench	Reuse
LH body harness ground strap from LH rear sill area	10 Nm (7.4 lbs-ft)	10 mm deep socket Ratchet/torque wrench	Reuse
LH body harness ground strap from LH side trunk area	10 Nm (7.4 lbs-ft)	Ratchet/torque wrench Ratchet/torque wrench	Reuse

Table 33. Torque Specifications: HARNESS - BODY RIGHT - LEFT HAND DRIVE - PREMIUM - 5 SEATS (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt securing ground harness from RH A-pillar area	10 Nm (7.4 lbs-ft)	10 mm deep socket Ratchet/torque wrench	Reuse
RH body harness ground strap from RH rear sill area	10 Nm (7.4 lbs-ft)	10 mm deep socket Ratchet/torque wrench	Reuse
Nut secure PCS cable to 12V passthrough output	9 Nm (6.6 lbs-ft)	Cordless Ratchet/Impact Driver 13 mm deep socket	Replace
Bolt secure rear RH side curtain air bag to body	8 Nm (5.9 lbs-ft)	10 mm deep socket RATCHET, 1/4" DR, M12, BARE TOOL	Reuse
RH body harness ground strap to RH side trunk area	10 Nm (7.4 lbs-ft)	10 mm deep socket TORQ WRNCH,DIG+ANG,1/4"DR,FIXHD,1.5~30Nm RATCHET, 1/4" DR, M12, BARE TOOL	Reuse