2026-01-20

Wheel Trim - Set (Performance) (Remove and Install)

Correction Code 34010201201 FRT 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-01-20: Released new procedure.
Informational PurposesAn informational icon, calling your attention
Note
The FRT for this procedure includes removal and installation of wheel trim sets on all four wheels. Add this code as an extra activity if the wheel trim set is to be transferred during a seasonal wheel and tire set swap.

Remove

  1. Pull the small inserts (x5) out to release the clips (x4).
  2. Press the large inserts (x5) outward from behind to release the clips (x4).
  3. Repeat

Install

Installation procedure is the reverse of removal, except for the following:

Perform a push-pull test to ensure that the wheel trim sets are firmly installed.