Wheel Liner - Rear - LH (Remove and Replace)
Correction code
1201020502
FRT
0.30
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Remove the LH rear wheel. See Wheel Assembly (Remove and Install).
-
Release the clips (x17) that attach
the LH rear wheel arch liner to the vehicle, and remove the liner from the
vehicle.
Install
- Position the LH rear wheel arch liner into the vehicle.
-
Install the push clips (x17) that
attach the LH rear wheel arch liner to the vehicle.
- Install the LH rear wheel. See Wheel Assembly (Remove and Install).