2025-03-12
Seat Fold Shoulder Switch - Center (Remove and Replace)
Correction code
1305030302
FRT
0.30
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the RH seatback center closeout from the seat frame. See Closeout - Armrest - 2nd Row (Remove and Replace).
-
Release 20 latch actuator cable from
seat fold shoulder switch.
-
Remove seat shoulder switch from 20 seatback.
Install
-
Install seat shoulder switch to 20
seatback.
-
Install 20 latch actuator cable to seat fold shoulder switch.
- Install the RH seatback center closeout to the seat frame. See Closeout - Armrest - 2nd Row (Remove and Replace).