2ND ROW SEAT 5 SEATER - 40 (Remove and Replace)
Correction code
1305010402
FRT
0.00
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Torque Specifications
Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
---|---|---|---|---|
Bolts that attach the 2nd row 60/40 seat frame to body |
![]() 37 Nm (27.3 lbs-ft) |
|
Replace | 1616775-00-B |
Remove
- Remove the 2nd row seat cushion. See 2ND ROW SEAT CUSHION (Remove and Replace).
- Remove the clips that attach the rear main cabin carpet to vehicle.
-
Remove and discard the bolts that
attach the 2nd row 40 seat frame to body.
NoteThe bottom seat bolts are located behind the main carpet.TIpUse of the following tool(s) is recommended:
- 11 mm socket
- Flex head ratchet/flex head torque wrench
- Cordless Ratchet/Impact Driver
- Disconnect the 2nd row 40 seat connector.
- With assistance, remove the 2nd row 40 seat assembly from the vehicle.
Install
- With assistance, install the 2nd row 40 seat assembly onto the vehicle.
-
Install new bolts to attach the 2nd
row 40 seat frame to body. Torque the bolts in sequence of outboard front, inboard rear,
outboard rear, and then inboard front.37 Nm (27.3 lbs-ft)NoteThe bottom seat bolts are located behind the main carpet.TIpUse of the following tool(s) is recommended:
- 11 mm socket
- Flex head ratchet/flex head torque wrench
- Cordless Ratchet/Impact Driver
- Install the clips that attach the rear main cabin carpet to vehicle.
- Connect the 2nd row 40 seat connector.
- Install the 2nd row seat cushion. See 2ND ROW SEAT CUSHION (Remove and Replace).