2026-02-12

Buckle - Seatbelt - LH - 3rd Row Seat (7-Seat) (Remove and Replace)

Correction code 2005030202 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the 3rd row B-Cover center outer. See B-Cover - Outer - Center Seatbelt - 3rd Row Seat (7-Seat) (Remove and Install).
  2. Remove clips from 3rd row B-Cover Center inner.
  3. Detach buckle harness connector from 3rd row seatback frame.
  4. Remove LH Buckle from 3rd row seat frame.
    Informational PurposesAn informational icon, calling your attention
    Note
    Flex inner B-cover to access T50 and retainer clip.

Install

  1. Install LH buckle onto 3rd row seat frame.
    Informational PurposesAn informational icon, calling your attention
    Note
    Properly route harness with retainer clip.
  2. Re-attach buckle harness connector onto 3rd row seat frame.
  3. Re-install clips onto 3rd Row B-Cover Center inner.
  4. Install the 3rd row B-Cover center outer. See B-Cover - Outer - Center Seatbelt - 3rd Row Seat (7-Seat) (Remove and Install).