2026-04-21
End Item - C-Pillar - Lower - RH (7-Seat) (Remove and Replace)
Correction code 1518012801 1518012802 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Open all doors and lower all windows.
- Move the RH front seat forward.
-
Move the 2nd row RH seat to easy entry
position.
NotePress the shoulder switch then push the seat forward.
-
Remove the RH lower C-pillar trim (4x
tabs, 3x clips).
NoteRelease the door seal as needed.
Install
-
Install the RH lower C-pillar trim (4x
tabs, 3x clips).
NoteSecure the door seal if released.
- Move the 2nd row RH seat to original position.
- Move the RH front seat to original position.
- Raise all windows and close all doors.