Wiper Arm - Driver (LHD) (Remove and Replace)
Correction code
1750020802
FRT
0.10
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make
sure wearing proper PPE when performing the below procedure.
Remove
- Remove the LH wiper arm and blade assembly. See Wiper Arm and Blade - Driver (Remove and Replace).
- Press down on the tab that attaches the LH wiper blade to the LH wiper arm, and then slide the wiper blade away to separate the arm from the assembly.
Install
-
Install the LH wiper blade to the LH wiper arm.
NoteAn audible is heard when the wiper blade is fulling engaged.
- Install the LH wiper arm and blade assembly. See Wiper Arm and Blade - Driver (Remove and Replace).