2026-08-09

Trim - C-Pillar - Lower - LH (5-Seat) (Remove and Replace)

Correction code 1518012102 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the 2nd row lower seat cushion. See Seat Cushion - 2nd Row (Remove and Replace).
  2. Partially release the lower section of the LH rear primary door seal.
  3. Release the clips and guide tabs that attach the C-pillar lower trim to the vehicle, and then remove the lower trim from the vehicle.
    Warning
    Wear cut-resistant gloves when performing this step to avoid personal injury.

Install

  1. Install the clips and guide tabs that attach the C-pillar lower trim to the vehicle.
  2. Install the lower section of the LH rear primary seal to the vehicle and make sure it is properly seated.
  3. Install the 2nd row lower seat cushion. See Seat Cushion - 2nd Row (Remove and Replace).