2025-10-30
Cover - Left Terminals - PN Prefixed with 2xx (Remove and Replace)
Correction code
1630021102
FRT
1.02
NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the pyro disconnect. See Pyro Disconnect - HV Battery (Remove and Replace).
-
Remove the harness clip from the left
terminals cover.
-
Release the tabs (x2) and datum to
remove the left terminals cover.
Install
-
Align the tabs (x2) and datum, then
install the left terminals cover.
-
Install the harness clip to the left
terminals cover.
- Install the pyro disconnect. See Pyro Disconnect - HV Battery (Remove and Replace).